Coilover Kit Street – XMTSGWBM133

Alkuperäinen hinta oli: 917,30 €.Nykyinen hinta on: 779,71 €. sis. ALV

21 – If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 – During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
3 – Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
35 – Rear thread adjustment block is mounted on the top.
39 – Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case.
73 – For easier height adjustment, we recommend removing the height adjustment, changing the position of the spring plate and reinstalling the height adjustment on the vehicle.

MTS Technik Black Month -15% ! 12.11.2026-13.12.2026
Arvioidut toimituspäivät: 23.11.2026 - 30.11.2026
Tuotetunnus (SKU): XMTSGWBM133 Osasto: Avainsana tuotteelle Tuotemerkki:

Kuvaus

Coilover Kit Street – XMTSGWBM133 is a coilover kits product (SKU XMTSGWBM133) with a inox finish, listed for 3 vehicle models from BMW.

Vehicle fitment

BMW 3 Touring (G21/G81)
Engine: 320 d Mild-Hybrid xDrive; 320 d xDrive; 330 i xDrive
Body type: Estate
Year: 2019 onwards
Drive type: AWD (All-Wheel Drive)
Max. axle load front: up to 1090 kg
Max. axle load rear: up to 1455 kg
Lowering front: 40 – 60 mm
Lowering rear: 40 – 60 mm
Camber plates front: No
Camber plates rear: No
TÜV certificate: Yes

BMW 3 Touring Van (G21)
Engine: 320 d xDrive
Body type: Estate Van
Year: 2019 onwards
Drive type: AWD (All-Wheel Drive)
Max. axle load front: up to 1090 kg
Max. axle load rear: up to 1455 kg
Lowering front: 40 – 60 mm
Lowering rear: 40 – 60 mm
Camber plates front: No
Camber plates rear: No
TÜV certificate: Yes

BMW 4 Coupe (G22/G82)
Engine: 420 d Mild-Hybrid xDrive; 420 i xDrive; 430 i xDrive
Body type: Coupe
Year: 2020 onwards
Drive type: AWD (All-Wheel Drive)
Max. axle load front: up to 1090 kg
Max. axle load rear: up to 1455 kg
Lowering front: 40 – 60 mm
Lowering rear: 40 – 60 mm
Camber plates front: No
Camber plates rear: No
TÜV certificate: Yes

Lisätiedot

Paino 24,9 kg (kilogramma)
Merkki

BMW

Malli

3 Touring (G21/G81), 3 Touring Van (G21), 4 Coupe (G22/G82)

Väri

Inox

Arviot

Tuotearvioita ei vielä ole.

Vain kirjautuneet asiakkaat -jotka ovat ostaneet tuotteen- voivat kirjoittaa tuotearvion.

Make Model Year
A - BMW Seria 3 - VII G20 / G21 / G80 - Touring 2019 - 2026
A - BMW Seria 3 - VII G20 / G21 / G80 - Touring Van 2019 - 2026
A - BMW Seria 4 - II G22 / G23 / G26 / G82 / G83 - Coupe 2020 - 2026