Kuvaus

3 – Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear)., 21 – If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower., 24 – During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers., 26 – Independent height adjustment at the lower brackets on the front dampers., 28 – Set includes 2x upper ”camber plates” on the front axle., 29 – The installation requires the use of OE front struts – they should be cut and welded as described in the attached manual., 33 – Including M-Technik., 35 – Rear thread adjustment block is mounted on the top., 62 – Front shock absorber housing with 52mm diameter.