Kuvaus

3 – Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear)., 8 – Not for 4×4., 9 – Only for vehicles without NIVO / OEM pneumatic suspension., 21 – If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower., 24 – During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers., 35 – Rear thread adjustment block is mounted on the top., 39 – Installation is also possible for vehicles with electronic damping force adjustment. The electronic system must be deactivated in this case., 73 – For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.