Kuvaus

2 – Front and rear axle height adjustable (threaded shock absorber housing)., 8 – Not for 4×4., 9 – Only for vehicles without NIVO / OEM pneumatic suspension., 17 – Only for vehicles without electronic damping., 21 – If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower., 24 – During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers., 26 – Independent height adjustment at the lower brackets on the front dampers., 28 – Set includes 2x upper ”camber plates” on the front axle., 29 – The installation requires the use of OE front struts – they should be cut and welded as described in the attached manual., 33 – Including M-Technik.