Coilover Kit Stance – XMTSGWVW28-S

764,30 € sis. ALV

2 – Front and rear axle height adjustable (threaded shock absorber housing).
21 – If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 – During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.

Arvioidut toimituspäivät: 21.11.2026 - 28.11.2026
Tuotetunnus (SKU): XMTSGWVW28-S Osasto: Avainsana tuotteelle Tuotemerkki:

Kuvaus

Coilover Kit Stance – XMTSGWVW28-S is a coilover kits product (SKU XMTSGWVW28-S) with a inox finish, listed for 4 vehicle models from Seat, Volkswagen.

Vehicle fitment

Seat CORDOBA (6K)
Engine: 1.4; 1.0; 1.0 i; 1.4 16V; 1.4 i; 1.4 i 16V; 1.6 i; 1.8 i; 1.8 T 20V Cupra; 1.9 D; 1.9 SDI; 1.9 TD; 1.9 TDI; 2.0 i; 2.0 i 16V
Body type: Saloon
Year: 1999-2002
Drive type: FWD (Front-Wheel Drive)
Max. axle load front: up to 900 kg
Max. axle load rear: up to 860 kg
Lowering front: 15 – 60 mm
Lowering rear: 20 – 85 mm
Camber plates front: No
Camber plates rear: No
TÜV certificate: Yes

Seat CORDOBA Vario (6K)
Engine: 1.4; 1.4 16V; 1.4 i; 1.6 i; 1.9 SDI; 1.9 TDI
Body type: Estate
Year: 1999-2002
Drive type: FWD (Front-Wheel Drive)
Max. axle load front: up to 900 kg
Max. axle load rear: up to 860 kg
Lowering front: 15 – 60 mm
Lowering rear: 20 – 85 mm
Camber plates front: No
Camber plates rear: No
TÜV certificate: Yes

Seat IBIZA II (6K)
Engine: 1.0 16V; 1.0 i; 1.4 16V; 1.4 i; 1.4 i 16V; 1.6 i; 1.8 T 20V Cupra; 1.9 SDI; 1.9 TDI
Body type: Hatchback
Year: 1999-2002
Drive type: FWD (Front-Wheel Drive)
Max. axle load front: up to 900 kg
Max. axle load rear: up to 860 kg
Lowering front: 15 – 60 mm
Lowering rear: 20 – 85 mm
Camber plates front: No
Camber plates rear: No
TÜV certificate: Yes

Volkswagen POLO (6N2)
Engine: 1.4; 1.0; 1.4 16V; 1.4 TDi; 1.4 TDI; 1.6 16V GTI; 1.7 SDI; 1.9 D; 1.9 SDI
Body type: Hatchback
Year: 1999-2001
Drive type: FWD (Front-Wheel Drive)
Max. axle load front: up to 900 kg
Max. axle load rear: up to 860 kg
Lowering front: 15 – 60 mm
Lowering rear: 20 – 85 mm
Camber plates front: No
Camber plates rear: No
TÜV certificate: Yes

Lisätiedot

Paino 24,9 kg (kilogramma)

Arviot

Tuotearvioita ei vielä ole.

Vain kirjautuneet asiakkaat -jotka ovat ostaneet tuotteen- voivat kirjoittaa tuotearvion.

Make Model Year
A - Seat Córdoba - I 6K 1999 - 2002
A - Seat Ibiza - II 6K 1999 - 2002
A - Volkswagen Polo - III 6N 1999 - 2001