Coilover Kit Street – XMTSGWBM19

1 172,40 € sis. ALV

2 – Front and rear axle height adjustable (threaded shock absorber housing).
21 – If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 – During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
26 – Independent height adjustment at the lower brackets on the front dampers.
28 – The kit includes 2 upper front camber plates.
29 – The installation requires the use of OE front struts – they should be cut and welded as described in the attached manual.
32 – In some cases additional OE-parts for the installation of the suspension components are required. Those are not included in the set.
33 – Including M-Technik.
65 – Suspension compatible only with a rear top mount with an internal diameter of 78mm – OEM number: 33521117657 or 33521126987. It is possible to mount the suspension to cars equipped with other top mounts, but original parts marked with one of the above numbers will be required.
66 – In the case of cars equipped with Nivo, it will be required to replace the rear top mounts with OEM: 33521117657 or 33521126987.

Arvioidut toimituspäivät: 22.11.2026 - 29.11.2026
Tuotetunnus (SKU): XMTSGWBM19 Osasto: Avainsana tuotteelle Tuotemerkki:

Kuvaus

Coilover Kit Street – XMTSGWBM19 is a coilover kits product (SKU XMTSGWBM19) with a inox finish, listed for 2 vehicle models from BMW. Includes camber plates on the front axle.

Vehicle fitment

BMW 5 (E28)
Engine: 518; 518 i; 520 i; 524 d; 524 td; 525 e; 525 i; 528 i; 535 i
Body type: Saloon
Year: 1981-1987
Drive type: RWD (Rear-Wheel Drive)
Max. axle load front: up to 930 kg
Max. axle load rear: up to 1030 kg
Lowering front: 25 – 110 mm
Lowering rear: 25 – 90 mm
Camber plates front: Yes
Camber plates rear: No
Additional information: strut diameter at the front axle of 55 mm
TÜV certificate: No

BMW 6 (E24)
Engine: 628 CSi; 635 CSi; 633 CSi; M 635 CSi
Body type: Coupe
Year: 1982-1989
Drive type: RWD (Rear-Wheel Drive)
Max. axle load front: up to 980 kg
Max. axle load rear: up to 1000 kg
Lowering front: 25 – 110 mm
Lowering rear: 25 – 90 mm
Camber plates front: Yes
Camber plates rear: No
Additional information: strut diameter at the front axle of 55 mm
TÜV certificate: No

Lisätiedot

Paino 29,9 kg (kilogramma)
Merkki

BMW

Malli

5 (E28), 6 (E24)

Väri

Inox

Arviot

Tuotearvioita ei vielä ole.

Vain kirjautuneet asiakkaat -jotka ovat ostaneet tuotteen- voivat kirjoittaa tuotearvion.

Make Model Year
A - BMW Seria 5 - II E28 1981 - 1987
A - BMW Seria 6 - I E24 1982 - 1989