Coilover Kit Street – XMTSGWAL10

866,30 € sis. ALV

17 – Only for vehicles without electronic damping.
21 – If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 – During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
3 – Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
35 – Rear thread adjustment block is mounted on the top.

Arvioidut toimituspäivät: 22.11.2026 - 29.11.2026

Kuvaus

Coilover Kit Street – XMTSGWAL10 is a coilover kits product (SKU XMTSGWAL10) with a inox finish, listed for 1 vehicle model from Alfa Romeo.

Vehicle fitment

Alfa Romeo GIULIETTA (940)
Engine: 1.4 BiFuel (940FXA1A, 940FXT1A); 1.4 TB (940.FYA1A); 1.4 TB (940FXA1A, 940FXT1A); 1.4 TB (940FXB1A, 940FXB11); 1.4 TB (940FXF1A); 1.4 TB (940FXG1A); 1.4 TB (940FXN1A, 940FXU1A); 1.6 JTDM (940FXD1A); 1.6 JTDM (940FYB11, 940FYB1A, 940FYF11, 940FYF1A); 1.6 JTDM (940FYE11, 940FYE1A); 1.8 TBi (940FXC1A); 1.8 TBi (940FXR11); 2.0 JTDM (940.FXL1A); 2.0 JTDM (940FXE1A, 940FXG11); 2.0 JTDM (940FXH1A, 940FXH11, 940FXZ11, 940FXZ1A); 2.0 JTDM (940FXM1A, 940FXS1A, 940FYD1A); 2.0 JTDM (940FXQ1A, 940FYC1A); 2.0 JTDM (940FXV11)
Body type: Hatchback
Year: 2010-2020
Drive type: FWD (Front-Wheel Drive)
Max. axle load front: up to 1100 kg
Max. axle load rear: up to 850 kg
Lowering front: 25 – 55 mm
Lowering rear: 25 – 50 mm
Camber plates front: No
Camber plates rear: No
TÜV certificate: Yes

Lisätiedot

Paino 24,9 kg (kilogramma)
Merkki

Alfa Romeo

Malli

GIULIETTA (940)

Väri

Inox

Arviot

Tuotearvioita ei vielä ole.

Vain kirjautuneet asiakkaat -jotka ovat ostaneet tuotteen- voivat kirjoittaa tuotearvion.

Make Model Year
A - Alfa Romeo Giulietta - III type 940 2010 - 2020