Coilover kits
Coilover kits - Image 2
Coilover kits - Image 3
Coilover kits - Image 4

Coilover kits

1 172,40 €

21 – If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 – During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
28 – The kit includes 2 upper front camber plates.
3 – Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
33 – Including M-Technik.
35 – Rear thread adjustment block is mounted on the top.
73 – For easier height adjustment, we recommend removing the height adjustment, changing the position of the spring plate and reinstalling the height adjustment on the vehicle.

Tuotetunnus (SKU): XMTSGWBM23-S Osasto: Avainsana tuotteelle Tuotemerkki:

Kuvaus

Coilover Kit Stance – XMTSGWBM23-S is a coilover kits product (SKU XMTSGWBM23-S) with a inox finish, listed for 2 vehicle models from BMW. Includes camber plates on the front axle and camber plates on the rear axle.

Vehicle fitment

BMW Z3 Coupe (E36)
Engine: 2.8 i; 3.0 i
Body type: Coupe
Year: 1997-2003
Drive type: RWD (Rear-Wheel Drive)
Max. axle load front: up to 830 kg
Max. axle load rear: up to 870 kg
Lowering front: 35 – 70 mm
Lowering rear: 55 – 95 mm
Camber plates front: Yes
Camber plates rear: Yes
TÜV certificate: No

BMW Z3 Roadster (E36)
Engine: 1.8 i; 1.9 i; 2.0 i; 2.2 i; 2.8 i; 3.0 i
Body type: Convertible
Year: 1995-2003
Drive type: RWD (Rear-Wheel Drive)
Max. axle load front: up to 830 kg
Max. axle load rear: up to 870 kg
Lowering front: 35 – 70 mm
Lowering rear: 35 – 75 mm
Camber plates front: Yes
Camber plates rear: Yes
TÜV certificate: No

Lisätiedot

Paino 24,9 kg (kilogramma)

Arviot

Tuotearvioita ei vielä ole.

Vain kirjautuneet asiakkaat -jotka ovat ostaneet tuotteen- voivat kirjoittaa tuotearvion.

Tutustu myös