Kuvaus

2 – Front and rear axle height adjustable (threaded shock absorber housing)., 8 – Not for 4×4., 9 – Only for vehicles without NIVO / OEM pneumatic suspension., 21 – If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower., 24 – During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers., 29 – The installation requires the use of OE front struts – they should be cut and welded as described in the attached manual., 64 – After the purchase, the original front axle struts should be sent to the headquarters of MTS Technik. Prior to shipment, all elements such as hubs, bearings, covers, shock absorber inserts, bolts and nuts should be dismantled. If the axle struts are delivered without prior disassembly of the above-mentioned parts or if MTS Technik finds any damage, such as broken column bolts, the axle struts will be returned or an additional fee will be charged., 133 – Available for delivery only within the European Union.